- BrandСервисМашСтрой KZ
- Country of manufactureKazakhstan
Pulley of brake KC-3577.28.126-1 of the mechanism of turn of the truck crane Resident of Ivanovo
The pulley of brake KC-3577.28.126-1 is a component of the mechanism of turn of the truck crane which are covered by brake tapes, consisting of two half connected among themselves by the hinge. The brake pulley with the gear coupling and details of a brake is placed in the top part of the case of the mechanism of turn having a special window for access to the specified details.
The brake of the mechanism of turn of the truck crane is carried out by a breaker of a brake which under the influence of pressure upon levers, is taken away by blocks from a brake pulley.
The pulley brake – represents a frictional wheel with the wide rim covered by a belt or a rope. It is used as one of the main parts of a belt drive.
The pulley brake fastens or is horizontal, or vertically, depending on a structure of the crane which is installed on gross mechanisms and serves as means of the emergency stop of the crane with the switched-off engine.
The brake pulley is a detail of the crane which is quickly enough used up as constantly is in a condition of a sliding friction. For this reason the brake pulley is made of steel or cast iron of the increased durability, and also carry out heat treatment of a detail. In order to avoid accidents the brake pulley is established in hard-to-reach spots of the crane, such as a reverse side of an entrance shaft of a reducer , or between shaft of a reducer and the electric motor. For ensuring full safety the brake pulley is covered kozhukhy. For completely reliable work of a brake pulley on its surface there should not be no crack or a sink. In order to avoid their emergence it is necessary to carry out diagnostics of this detail often.
Technical characteristics
Designation – KC-3577.28.126-1
Diameter, mm – 45
The weight, kg – 2,850
The pulley of brake KC-3577.28.126-1 serves for a stop of mechanisms and the Resident of Ivanovo of KS-3574, KS-3577, KS-35714, KS-35715, KS-45717 and their modifications is applied in a design of the mechanism of turn of the truck crane
We work only directly with producers across all Russia that allows to provide existence of the full range of original spare parts for truck cranes "Resident of Ivanovo", "Galichanin", "Klintsy", "Uglichmash", "Resident of Chelyabinsk", "Resident of Ulyanovsk", etc. from the leading manufacturers at the lowest prices.
You will be able to buy at the favorable prices practically any spare parts for domestic truck cranes concerning a truck crane hydraulic actuator (pumps, hydromotors), elements of not rotary part of the truck crane (a frame not rotary), frames rotary with mechanisms, boom oborudovny, drives of management of crane operations, electric equipment, devices of safety (OGM240-18, OGM240-14, ONK-M, ONK-140, ONK-160) for the crane and many other things.Possessing a big warehouse of spare parts and the developed supply network, our company in the mildest terms realizes any requirement on the spare part for truck cranes including complex any complexity. An individual approach, reasonable prices, the quality system, a guarantee, flexible system of discounts, both for old partners, and for the new companies – guarantee of durable and trouble-free operation of your equipment.
Why it makes sense to take spare parts from us? Because we:
• we sell from existence – if in the order of one or slightly more pieces. When purchasing a large party delivery to the fast order is possible;
• we provide delivery to the majority of the cities with convenient means of transport, including combined sendings;
• we try to maintain the fastest speed of sending, at the same time the prices at us quite democratic – i.e. not above average market.
• we provide discounts when purchasing party, and also at regular purchases;
• we deliver the spare parts manufactured of quality steel (steel 45). Shaft with heat treatment, gear wheels – heat treatment + cementation. It provides their high contact durability and wear resistance. What, in turn, increases the general reliability of the crane and reduces terms of the compelled idle times
Spare parts for truck cranes:
Hydraulic cylinders
, Gidroraspredeliteli, Gidromotora, Hydraulic pumps, the Pipeline connection, Connection rotating Hoses of a high pressure, Gidroklapan, RTI, the Basic and Rotary Device (BRD), the turn Mechanism, the Reducer of the cargo winch, the Basis of an arrow, arrow Section, the Mechanism of blocking of a suspension bracket,
the Box of Selection of Power (BSP)
, Anemometers, loading capacity Limiters
TURN MECHANISM
Mechanism of turn of the truck crane Galichanin (reducer) KS-2574.28.100-1-02G
Mechanism of turn of the truck crane Klintsy (reducer) of KC-2574.28.100-1-03K
Mechanism of turn of the truck crane Resident of Ivanovo (reducer) of KC-3577.28.000
Mechanism of turn of the truck crane Resident of Ivanovo (reducer) of KC-3577.28.000-1
Lower part of the case of the mechanism of turn of KC-3577.28.102 (KC-2574.28.202)
Top part of the case of the mechanism of turn of KC-3577.28.081 (KC-2574.28.181)
Shaft of shlitsevy KC-3577.28.093-3 (16 x 16) of the mechanism of turn of the truck crane
Shaft of shlitsevy KC-3577.28.093-2 (16 x 14) of the mechanism of turn of the truck crane
KC-3577.28.101-1 shaft gear wheel
Shaft — KC-3577.28.073-3 (turnkey) gear wheel
Cover of KC-3577.28.087-2, KC-2574.28.187-1 of the mechanism of turn
KC-3577.28.104, KC-2574.28.204 semi-coupling
Cogwheel of KC-3577.28.083-3, KC-35716.28.183
Cogwheel of KC-3577.28.097-3, KC-35716.28.197
Breaker of a brake of KC-3577.28.200, KC-2574.28.500
Gear wheel of an output shaft (13th tooth.) KC-3577.28.092
Gear wheel of an output shaft (14th tooth.) KC-45717.28.101, KC-4572.28.101
Pulley of brake KC-3577.28.126 (KC-35716.28.102)
Pulley of brake KC-2574.28.234
Block brake KC-3577.28.030 (KC-2574.28.130)
Pulley brake the mechanism of turn KC-3577.28.126-1 for KS-3577, 45717
Reducer of the mechanism of turn of KC-45721.28.00.1000-01 for KS-45721
Breaker of a brake of the mechanism of turn of KC-45721.28.00.1300
Pulley brake mechanism of turn KC-3577.28.134 F =35mm
Bearing (turn mechanism) 1606, 217, 3614
Bearing of fastening of a hydraulic cylinder of raising of an arrow ShSL-90K1
HYDROEQUIPMENT
